Material reference

Silicon Carbide SiC

Extreme thermal conductivity and shock resistance with non-wetting behaviour to molten metals — the high-performance choice for kiln furniture and melt-handling.

用途: kiln furniture · molten-metal components · thermocouple sheaths · heat exchangers · wear parts · burner tubes

At a glance

Key Properties

High thermal conductivity
Excellent thermal shock resistance
Very high strength and high temperature stability
Non-wetting to molten metals
Very low thermal expansion
High temperature resistance

詳細

この材料は上記の製品・用途に限定されません。詳細や他の製品・用途についてはこちらをご覧ください。

Porous silicon carbides with excellent thermal shock, high strength and high temperature operating capability up to 2910 F (1600C). Excellent for use in furnaces and molten metal applications due to it’s non wetting properties. Stock available in tubes, thermocouple sheaths, rods, crucibles and beams

Silicon Carbideのデータシートを請求

Full property data, grade comparison, machining guidance and typical applications. EN and FR versions available.

At a glance

Applications

Kiln furniture Induction heating Saggers Semi-con manufacturing Molten metal processing Metal filtration Burner nozzles
At a glance

Grades

Mullite Bonded SiC - 70% SiC (SC70)Mullite Bonded SiC - 90% SiC (SC90)Re-crystallised Silicon Carbide (RSiC)Reaction Bonded Silicon Carbide (RBSiC / SiSiC)Sintered Silicon Carbide (SSiC)Nitride Bonded Silicon Carbide (NBSiC)
FAQs

Frequent technical questions

Why is SiC so good for kiln furniture?

High thermal conductivity moves heat in and out of the load fast, low expansion plus high strength tolerates rapid cycling, and the carbide doesn’t wet most melts. Together that means faster fires, less cracking and less contamination than oxide alternatives.

When should I choose dense over porous SiC?

Dense (SiSiC, RSiC) is specified where gas-tightness, mechanical loading or wear governs. Porous bonded grades are the workhorse for setters, posts and batts where thermal mass and low cost matter more than peak strength.

Will SiC handle molten aluminium?

Yes — SiC is widely used as immersion heater sheaths, riser tubes and degassing components in aluminium handling. For prolonged contact, check for oxidation protection and free-silicon levels with us before specifying.

How to you decide which silicon carbide grade to use?

Speak to a ceramic expert to find out which grade is suitable for your application due to big differences between the performance and application of each grade?

お問い合わせ

Need help choosing a grade? Talk to our materials team.

Tell us your operating temperature, the chemistry it'll see and any mechanical loads. We'll specify a grade — or recommend an alternative material — and link you directly to matching products.

  • ISO 9001 certified
  • Stock held in Kidderminster (UK) and Île-de-France (France)
  • No minimum order value
お問い合わせフォーム

ご要望をお聞かせください

A member of the team will come back to you with a recommendation or a quote.

    I would like to receive marketing communications, technical insights and event invitations from Anderman & Company by email
    詳しくはプライバシーポリシーをご覧ください。