Alumina Rods Solid ceramic rods for furnace and insulation work [TEST]
[TEST placeholder, not for publication] Dense aluminium-oxide rods in 95% to 99.7% purity grades for furnace supports, insulators and wear parts. Choose alumina when a rod must stay hard, electrically insulating and chemically inert to around 1750 °C [TBC]. Stocked in Kidderminster (UK) and Île-de-France (France), supplied under ISO 9001 with no minimum order value.
Where alumina rods are used
Why choose alumina rods?
The workhorse oxide ceramic [TEST]
[TEST placeholder] Alumina is hard, wear-resistant, electrically insulating and chemically inert, and stable to around 1750 °C [TBC]. In rod form that makes it the default choice for furnace supports, push rods and insulating spacers, at a lower cost than zirconia or silicon carbide.
Choose a higher purity grade where corrosion resistance or dielectric strength matters. The full ceramic tubes & rods range covers the other materials.
Discuss your applicationWhich alumine grade do you need?
[TEST placeholder] Higher purity generally means better corrosion resistance and electrical performance, at higher cost. Confirm which grades are stocked as rods.
Dimensions standard, sur stock et sur commande
Gammes de dimensions standard
[TEST placeholder] Standard diameters are held in stock and cut to length; larger diameters and ground finishes are made to order. Tolerances to be confirmed with the machine shop.
Discuss your applicationAlumine vs Mullite vs Carbure de silicium
[TEST placeholder] Alumina is the default rod material; choose an alternative where thermal shock, transparency or thermal conductivity matters more than hardness and insulation.
3 materials compared Temp. max · Choc thermique · Résistance à l'usure · Résistance chimique · Isolation électrique · À choisir quand… Show comparison Hide comparison
| Matériau | Temp. max *°C | Choc thermique | Résistance à l'usure | Résistance chimique | Isolation électrique | À choisir quand… | View |
|---|---|---|---|---|---|---|---|
| Alumine Al₂O₃ | 1,800°C | Faible | Bon | Bon | Bon | Cette page. Hardness, insulation and chemical inertness at the best price [TBC]. | |
| Mullite 3Al₂O₃·2SiO₂ | 1,500°C | Bon | Modéré | Bon | Bon | Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC]. | |
| Carbure de silicium SiC | 1,600°C | Bon | Bon | Bon | Faible | You need thermal conductivity and hot strength, and insulation is not required [TBC]. |
Mullite
3Al₂O₃·2SiO₂Carbure de silicium
SiCDonnées matériau : Alumine
Température maximale d'utilisation 1,800 °C Densité À confirmer Résistance à la flexion À confirmer Show all 9 properties Hide full data sheet
| Propriété | Valeur typique | Unité | Norme d'essai |
|---|---|---|---|
| Densité | À confirmer | g/cm³ | ASTM C20 |
| Absorption d'eau | < 0.1 [TBC] | % | ASTM C373 |
| Dureté | À confirmer | Mohs / Rockwell 45N | ASTM E18 |
| Résistance à la flexion | À confirmer | MPa | ASTM F417 |
| Température maximale d'utilisation | 1,800 selon fiche matériau | °C | — |
| Conductivité thermique à 25 °C | À confirmer | W/m·K | — |
| Dilatation thermique (20–1000 °C) | À confirmer | ×10⁻⁶/K | — |
| Rigidité diélectrique | À confirmer | kV/mm | IEC 60672 |
| Résistivité volumique | À confirmer | Ω·cm | JIS K6911 |
Alumine: typical properties
[TEST placeholder] Typical values for dense alumina; grade-specific figures on request. No figure is published until it comes from supplier data.
Frequent technical questions
What is the maximum temperature for alumina rods?
[TEST placeholder] Continuous use to around 1700 to 1750 °C with the right grade [TBC]. Above this, strength falls and creep accelerates.
Do you hold stock, and what is the lead time?
[TEST placeholder] Stock is held in Kidderminster (UK) and Île-de-France (France). Lead times for made-to-order sizes to be confirmed with sales [TBC].
Aucune FAQ ne correspond. Essayez un autre mot-clé ou contactez-nous directement.
Alumine sous d'autres formes
Alumina rods from stock in the UK and France, no minimum order [TEST]
[TEST placeholder] Tell us what the rod has to do and we will recommend a grade and size, from stock or made to order. ISO 9001 certified supply from Kidderminster and Île-de-France.
- ISO 9001 certified
- Stock held in Kidderminster (UK) and Île-de-France (France)
- No minimum order value
Dites-nous ce dont vous avez besoin
A member of the team will come back to you with a recommendation or a quote.

