Alumina · Ceramic Tubes & Rods

Alumina Rods Solid ceramic rods for furnace and insulation work [TEST]

[TEST placeholder, not for publication] Dense aluminium-oxide rods in 95% to 99.7% purity grades for furnace supports, insulators and wear parts. Choose alumina when a rod must stay hard, electrically insulating and chemically inert to around 1750 °C [TBC]. Stocked in Kidderminster (UK) and Île-de-France (France), supplied under ISO 9001 with no minimum order value.

主な用途

Where alumina rods are used

Why alumina

Why choose alumina rods?

Hard-wearingInsulatingChemically inertEconomical

The workhorse oxide ceramic [TEST]

[TEST placeholder] Alumina is hard, wear-resistant, electrically insulating and chemically inert, and stable to around 1750 °C [TBC]. In rod form that makes it the default choice for furnace supports, push rods and insulating spacers, at a lower cost than zirconia or silicon carbide.

Choose a higher purity grade where corrosion resistance or dielectric strength matters. The full ceramic tubes & rods range covers the other materials.

Discuss your application
グレードと純度

Which alumina grade do you need?

[TEST placeholder] Higher purity generally means better corrosion resistance and electrical performance, at higher cost. Confirm which grades are stocked as rods.

95% Al₂O₃ 95% alumina Lowest-cost dense grade. Good wear and general thermal performance [TBC].
耐食性 中 電気的性能 中 相対コスト Lowest
最適な用途: General furnace supports and wear parts [TBC]
99% Al₂O₃ 99% alumina Higher corrosion resistance and electrical performance than 95% [TBC].
耐食性 良 電気的性能 良 相対コスト Mid
最適な用途: Electrical insulation, laboratory furnace work [TBC]
99.7% Al₂O₃ 99.7% alumina Highest purity stocked. Best corrosion and electrical performance [TBC].
耐食性 良 電気的性能 良 相対コスト Highest
最適な用途: Semiconductor, high-vacuum and analytical work [TBC]
サイズと公差

標準サイズ・在庫品・受注生産

在庫品定尺カット受注生産

標準サイズ範囲

Diameter 3 to 50 mm [TBC] Stock lengths 確認中 Machining tolerance ±0.1 mm [TBC]

[TEST placeholder] Standard diameters are held in stock and cut to length; larger diameters and ground finishes are made to order. Tolerances to be confirmed with the machine shop.

Discuss your application
材料の選び方

Alumina vs Mullite vs Silicon Carbide

[TEST placeholder] Alumina is the default rod material; choose an alternative where thermal shock, transparency or thermal conductivity matters more than hardness and insulation.

3 materials compared 最高温度 · 熱衝撃 · 耐摩耗性 · 耐薬品性 · 電気絶縁性 · こんな場合に最適… Show comparison Hide comparison
材料 最高温度 *°C 熱衝撃耐摩耗性耐薬品性電気絶縁性 こんな場合に最適… View
Alumina 1,800°C 不良良良良 このページ。 Hardness, insulation and chemical inertness at the best price [TBC].
Mullite 3Al₂O₃·2SiO₂ 1,500°C 良中良良 Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC].
Silicon Carbide SiC 1,600°C 良良良不良 You need thermal conductivity and hot strength, and insulation is not required [TBC].

Alumina

最高温度 *1,800°C
熱衝撃不良
耐摩耗性良
耐薬品性良
電気絶縁性良
こんな場合に最適…このページ。 Hardness, insulation and chemical inertness at the best price [TBC].

Mullite

3Al₂O₃·2SiO₂
最高温度 *1,500°C
熱衝撃良
耐摩耗性中
耐薬品性良
電気絶縁性良
こんな場合に最適…Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC].

Silicon Carbide

SiC
最高温度 *1,600°C
熱衝撃良
耐摩耗性良
耐薬品性良
電気絶縁性不良
こんな場合に最適…You need thermal conductivity and hot strength, and insulation is not required [TBC].
技術特性

Aluminaの材料データ

最高使用温度 1,800 °C 密度 確認中 曲げ強度 確認中 Show all 9 properties Hide full data sheet
Alumina: typical properties
特性 代表値 単位 試験規格
密度 確認中 g/cm³ ASTM C20
吸水率 < 0.1 [TBC] % ASTM C373
硬度 確認中 Mohs / Rockwell 45N ASTM E18
曲げ強度 確認中 MPa ASTM F417
最高使用温度 1,800 材料ページの値 °C —
熱伝導率(25 °C) 確認中 W/m·K —
熱膨張係数(20~1000 °C) 確認中 ×10⁻⁶/K —
絶縁耐力 確認中 kV/mm IEC 60672
体積抵抗率 確認中 Ω·cm JIS K6911

Alumina: typical properties

密度確認中 g/cm³
吸水率< 0.1 [TBC] %
硬度確認中 Mohs / Rockwell 45N
曲げ強度確認中 MPa
最高使用温度1,800 材料ページの値 °C
熱伝導率(25 °C)確認中 W/m·K
熱膨張係数(20~1000 °C)確認中 ×10⁻⁶/K
絶縁耐力確認中 kV/mm
体積抵抗率確認中 Ω·cm

[TEST placeholder] Typical values for dense alumina; grade-specific figures on request. No figure is published until it comes from supplier data.

FAQs

Frequent technical questions

What is the maximum temperature for alumina rods?

[TEST placeholder] Continuous use to around 1700 to 1750 °C with the right grade [TBC]. Above this, strength falls and creep accelerates.

Do you hold stock, and what is the lead time?

[TEST placeholder] Stock is held in Kidderminster (UK) and Île-de-France (France). Lead times for made-to-order sizes to be confirmed with sales [TBC].

お問い合わせ

Alumina rods from stock in the UK and France, no minimum order [TEST]

[TEST placeholder] Tell us what the rod has to do and we will recommend a grade and size, from stock or made to order. ISO 9001 certified supply from Kidderminster and Île-de-France.

  • ISO 9001 certified
  • Stock held in Kidderminster (UK) and Île-de-France (France)
  • No minimum order value
お問い合わせフォーム

ご要望をお聞かせください

A member of the team will come back to you with a recommendation or a quote.

    I would like to receive marketing communications, technical insights and event invitations from Anderman & Company by email
    詳しくはプライバシーポリシーをご覧ください。