Alumina Rods Solid ceramic rods for furnace and insulation work [TEST]
[TEST placeholder, not for publication] Dense aluminium-oxide rods in 95% to 99.7% purity grades for furnace supports, insulators and wear parts. Choose alumina when a rod must stay hard, electrically insulating and chemically inert to around 1750 °C [TBC]. Stocked in Kidderminster (UK) and Île-de-France (France), supplied under ISO 9001 with no minimum order value.
Where alumina rods are used
Why choose alumina rods?
The workhorse oxide ceramic [TEST]
[TEST placeholder] Alumina is hard, wear-resistant, electrically insulating and chemically inert, and stable to around 1750 °C [TBC]. In rod form that makes it the default choice for furnace supports, push rods and insulating spacers, at a lower cost than zirconia or silicon carbide.
Choose a higher purity grade where corrosion resistance or dielectric strength matters. The full ceramic tubes & rods range covers the other materials.
Discuss your applicationWhich alumina grade do you need?
[TEST placeholder] Higher purity generally means better corrosion resistance and electrical performance, at higher cost. Confirm which grades are stocked as rods.
Medidas estándar, en stock y bajo pedido
Rangos de medidas estándar
[TEST placeholder] Standard diameters are held in stock and cut to length; larger diameters and ground finishes are made to order. Tolerances to be confirmed with the machine shop.
Discuss your applicationAlumina vs Mullite vs Silicon Carbide
[TEST placeholder] Alumina is the default rod material; choose an alternative where thermal shock, transparency or thermal conductivity matters more than hardness and insulation.
3 materials compared Temp. máx. · Choque térmico · Resistencia al desgaste · Resistencia química · Aislamiento eléctrico · Elíjalo cuando… Show comparison Hide comparison
| Material | Temp. máx. *°C | Choque térmico | Resistencia al desgaste | Resistencia química | Aislamiento eléctrico | Elíjalo cuando… | View |
|---|---|---|---|---|---|---|---|
| Alumina | 1,800°C | Baja | Buena | Buena | Buena | Esta página. Hardness, insulation and chemical inertness at the best price [TBC]. | |
| Mullite 3Al₂O₃·2SiO₂ | 1,500°C | Buena | Moderada | Buena | Buena | Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC]. | |
| Silicon Carbide SiC | 1,600°C | Buena | Buena | Buena | Baja | You need thermal conductivity and hot strength, and insulation is not required [TBC]. |
Mullite
3Al₂O₃·2SiO₂Silicon Carbide
SiCDatos del material: Alumina
Temperatura máxima de servicio 1,800 °C Densidad Por confirmar Resistencia a la flexión Por confirmar Show all 9 properties Hide full data sheet
| Propiedad | Valor típico | Unidad | Norma de ensayo |
|---|---|---|---|
| Densidad | Por confirmar | g/cm³ | ASTM C20 |
| Absorción de agua | < 0.1 [TBC] | % | ASTM C373 |
| Dureza | Por confirmar | Mohs / Rockwell 45N | ASTM E18 |
| Resistencia a la flexión | Por confirmar | MPa | ASTM F417 |
| Temperatura máxima de servicio | 1,800 según ficha del material | °C | — |
| Conductividad térmica a 25 °C | Por confirmar | W/m·K | — |
| Dilatación térmica (20–1000 °C) | Por confirmar | ×10⁻⁶/K | — |
| Rigidez dieléctrica | Por confirmar | kV/mm | IEC 60672 |
| Resistividad volumétrica | Por confirmar | Ω·cm | JIS K6911 |
Alumina: typical properties
[TEST placeholder] Typical values for dense alumina; grade-specific figures on request. No figure is published until it comes from supplier data.
Frequent technical questions
What is the maximum temperature for alumina rods?
[TEST placeholder] Continuous use to around 1700 to 1750 °C with the right grade [TBC]. Above this, strength falls and creep accelerates.
Do you hold stock, and what is the lead time?
[TEST placeholder] Stock is held in Kidderminster (UK) and Île-de-France (France). Lead times for made-to-order sizes to be confirmed with sales [TBC].
Ninguna FAQ coincide. Pruebe otra palabra clave o contáctenos directamente.
Alumina en otros formatos
Alumina rods from stock in the UK and France, no minimum order [TEST]
[TEST placeholder] Tell us what the rod has to do and we will recommend a grade and size, from stock or made to order. ISO 9001 certified supply from Kidderminster and Île-de-France.
- ISO 9001 certified
- Stock held in Kidderminster (UK) and Île-de-France (France)
- No minimum order value
Díganos qué necesita
A member of the team will come back to you with a recommendation or a quote.

