Alumina Rods Solid ceramic rods for furnace and insulation work [TEST]
[TEST placeholder, not for publication] Dense aluminium-oxide rods in 95% to 99.7% purity grades for furnace supports, insulators and wear parts. Choose alumina when a rod must stay hard, electrically insulating and chemically inert to around 1750 °C [TBC]. Stocked in Kidderminster (UK) and Île-de-France (France), supplied under ISO 9001 with no minimum order value.
Where alumina rods are used
Why choose alumina rods?
The workhorse oxide ceramic [TEST]
[TEST placeholder] Alumina is hard, wear-resistant, electrically insulating and chemically inert, and stable to around 1750 °C [TBC]. In rod form that makes it the default choice for furnace supports, push rods and insulating spacers, at a lower cost than zirconia or silicon carbide.
Choose a higher purity grade where corrosion resistance or dielectric strength matters. The full ceramic tubes & rods range covers the other materials.
Discuss your applicationWhich alumina grade do you need?
[TEST placeholder] Higher purity generally means better corrosion resistance and electrical performance, at higher cost. Confirm which grades are stocked as rods.
Standard sizes, stock and made to order
Standard size ranges
[TEST placeholder] Standard diameters are held in stock and cut to length; larger diameters and ground finishes are made to order. Tolerances to be confirmed with the machine shop.
Discuss your applicationAlumina vs Mullite vs Silicon Carbide
[TEST placeholder] Alumina is the default rod material; choose an alternative where thermal shock, transparency or thermal conductivity matters more than hardness and insulation.
3 materials compared Max temp · Thermal shock · Wear resistance · Chemical resistance · Electrical insulation · Choose this when… Show comparison Hide comparison
| Material | Max temp *°C | Thermal shock | Wear resistance | Chemical resistance | Electrical insulation | Choose this when… | View |
|---|---|---|---|---|---|---|---|
| Alumina | 1,800°C | Poor | Good | Good | Good | This page. Hardness, insulation and chemical inertness at the best price [TBC]. | |
| Mullite 3Al₂O₃·2SiO₂ | 1,500°C | Good | Moderate | Good | Good | Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC]. | |
| Silicon Carbide SiC | 1,600°C | Good | Good | Good | Poor | You need thermal conductivity and hot strength, and insulation is not required [TBC]. |
Mullite
3Al₂O₃·2SiO₂Silicon Carbide
SiCAlumina material data
Maximum service temperature 1,800 °C Density TBC Flexural strength TBC Show all 9 properties Hide full data sheet
| Property | Typical value | Unit | Test standard |
|---|---|---|---|
| Density | TBC | g/cm³ | ASTM C20 |
| Water absorption | < 0.1 [TBC] | % | ASTM C373 |
| Hardness | TBC | Mohs / Rockwell 45N | ASTM E18 |
| Flexural strength | TBC | MPa | ASTM F417 |
| Maximum service temperature | 1,800 from hub | °C | — |
| Thermal conductivity @ 25 °C | TBC | W/m·K | — |
| Thermal expansion (20–1000 °C) | TBC | ×10⁻⁶/K | — |
| Dielectric strength | TBC | kV/mm | IEC 60672 |
| Volume resistivity | TBC | Ω·cm | JIS K6911 |
Alumina: typical properties
[TEST placeholder] Typical values for dense alumina; grade-specific figures on request. No figure is published until it comes from supplier data.
Frequent technical questions
What is the maximum temperature for alumina rods?
[TEST placeholder] Continuous use to around 1700 to 1750 °C with the right grade [TBC]. Above this, strength falls and creep accelerates.
Do you hold stock, and what is the lead time?
[TEST placeholder] Stock is held in Kidderminster (UK) and Île-de-France (France). Lead times for made-to-order sizes to be confirmed with sales [TBC].
No FAQs match your search. Try a different keyword or contact us directly.
Alumina in other forms
Alumina rods from stock in the UK and France, no minimum order [TEST]
[TEST placeholder] Tell us what the rod has to do and we will recommend a grade and size, from stock or made to order. ISO 9001 certified supply from Kidderminster and Île-de-France.
- ISO 9001 certified
- Stock held in Kidderminster (UK) and Île-de-France (France)
- No minimum order value
Tell us what you need
A member of the team will come back to you with a recommendation or a quote.

