Machined Boron Nitride Custom parts to your drawing [TEST]
[TEST placeholder, not for publication] We machine hexagonal boron nitride to your drawing, from one-off prototypes through to production quantities. Choose it when a part must survive thermal shock, resist molten metal and insulate at temperature, and still be machinable with standard tooling [TBC]. ISO 9001 certified, with engineering and stock in the UK and France.
Where machined boron nitride is used
Why choose machined boron nitride?
Standard tooling, no diamond grinding [TEST]
[TEST placeholder] Hexagonal boron nitride cuts with standard carbide tooling, so complex geometries that would need diamond grinding in alumina or zirconia can be turned, milled and drilled directly [TBC]. It resists rapid heating and cooling, is not wetted by most molten metals and glasses, and remains an electrical insulator at high temperature.
Where the part needs hardness or wear resistance instead, our machined ceramics service covers alumina, zirconia, silicon carbide and quartz to the same process.
Discuss your applicationWhat we can make, and what we cannot
[TEST placeholder] No invented tolerances: every figure TBC until confirmed with the machine shop.
Du plan à la pièce livrée
-
1
Tell us about the part
Describe the application in the form, then send the drawing or sketch by email: PDF, DXF or STEP [accepted formats TBC].
-
2
We review and quote
An engineer checks manufacturability and quotes [turnaround TBC].
-
3
Approval
You approve the quote and any drawing amendments.
-
4
Manufacture and delivery
Indicative lead time TBC weeks from approval.
Données matériau : Nitrure de bore
Température maximale d'utilisation 2,100 °C Densité À confirmer Résistance à la flexion À confirmer Show all 9 properties Hide full data sheet
| Propriété | Valeur typique | Unité | Norme d'essai |
|---|---|---|---|
| Densité | À confirmer | g/cm³ | ASTM C20 |
| Absorption d'eau | À confirmer | % | ASTM C373 |
| Dureté | À confirmer | Mohs / Rockwell 45N | ASTM E18 |
| Résistance à la flexion | À confirmer | MPa | ASTM F417 |
| Température maximale d'utilisation | 2,100 selon fiche matériau | °C | — |
| Conductivité thermique à 25 °C | À confirmer | W/m·K | — |
| Dilatation thermique (20–1000 °C) | À confirmer | ×10⁻⁶/K | — |
| Rigidité diélectrique | À confirmer | kV/mm | IEC 60672 |
| Résistivité volumique | À confirmer | Ω·cm | JIS K6911 |
Questions fréquentes
Can you machine boron nitride to a custom size?
[TEST placeholder] Yes. Parts are machined to your drawing from standard blanks; one-off prototypes and production runs are both welcome [TBC].
What is the minimum order quantity?
[TEST placeholder] There is no minimum order value; one-off prototypes are welcome [confirm this applies to machined parts].
Aucune FAQ ne correspond. Essayez un autre mot-clé ou contactez-nous directement.
Nitrure de bore sous d'autres formes
Machined boron nitride, prototype to production [TEST]
[TEST placeholder] Tell us about the part and an engineer will review manufacturability and quote. Drawings can follow by email. ISO 9001 certified, UK and France.
- ISO 9001 certified
- Stock held in Kidderminster (UK) and Île-de-France (France)
- No minimum order value
Dites-nous ce dont vous avez besoin
A member of the team will come back to you with a recommendation or a quote.