Boron Nitride · Machined Ceramics

Machined Boron Nitride Custom parts to your drawing [TEST]

[TEST placeholder, not for publication] We machine hexagonal boron nitride to your drawing, from one-off prototypes through to production quantities. Choose it when a part must survive thermal shock, resist molten metal and insulate at temperature, and still be machinable with standard tooling [TBC]. ISO 9001 certified, with engineering and stock in the UK and France.

Usos habituales

Where machined boron nitride is used

Why boron nitride

Why choose machined boron nitride?

MachinableThermal shockNon-wettingInsulating

Standard tooling, no diamond grinding [TEST]

[TEST placeholder] Hexagonal boron nitride cuts with standard carbide tooling, so complex geometries that would need diamond grinding in alumina or zirconia can be turned, milled and drilled directly [TBC]. It resists rapid heating and cooling, is not wetted by most molten metals and glasses, and remains an electrical insulator at high temperature.

Where the part needs hardness or wear resistance instead, our machined ceramics service covers alumina, zirconia, silicon carbide and quartz to the same process.

Discuss your application
Capacidad de mecanizado

What we can make, and what we cannot

Achievable tolerances
Linear ±TBC mm Bore ±TBC mm Flatness TBC
Blank sizes & forms
Rods to ØTBC mm Plates to TBC mm Bars, discs, billets
Boron nitride machining blanks →
Limits
Max part size TBC Min wall TBC mm Be honest about what cannot be done [writer]
¿No sabe si se puede fabricar? Describe the part anyway and an engineer will tell you what is possible. Discuss your application

[TEST placeholder] No invented tolerances: every figure TBC until confirmed with the machine shop.

Cómo hacer un pedido

Del plano a la pieza entregada

  1. 1

    Tell us about the part

    Describe the application in the form, then send the drawing or sketch by email: PDF, DXF or STEP [accepted formats TBC].

  2. 2

    We review and quote

    An engineer checks manufacturability and quotes [turnaround TBC].

  3. 3

    Approval

    You approve the quote and any drawing amendments.

  4. 4

    Manufacture and delivery

    Indicative lead time TBC weeks from approval.

Propiedades técnicas

Datos del material: Boron Nitride

Temperatura máxima de servicio 2,100 °C Densidad Por confirmar Resistencia a la flexión Por confirmar Show all 9 properties Hide full data sheet
Boron Nitride: typical properties
Propiedad Valor típico Unidad Norma de ensayo
Densidad Por confirmar g/cm³ ASTM C20
Absorción de agua Por confirmar % ASTM C373
Dureza Por confirmar Mohs / Rockwell 45N ASTM E18
Resistencia a la flexión Por confirmar MPa ASTM F417
Temperatura máxima de servicio 2,100 según ficha del material °C —
Conductividad térmica a 25 °C Por confirmar W/m·K —
Dilatación térmica (20–1000 °C) Por confirmar ×10⁻⁶/K —
Rigidez dieléctrica Por confirmar kV/mm IEC 60672
Resistividad volumétrica Por confirmar Ω·cm JIS K6911

Boron Nitride: typical properties

DensidadPor confirmar g/cm³
Absorción de aguaPor confirmar %
DurezaPor confirmar Mohs / Rockwell 45N
Resistencia a la flexiónPor confirmar MPa
Temperatura máxima de servicio2,100 según ficha del material °C
Conductividad térmica a 25 °CPor confirmar W/m·K
Dilatación térmica (20–1000 °C)Por confirmar ×10⁻⁶/K
Rigidez dieléctricaPor confirmar kV/mm
Resistividad volumétricaPor confirmar Ω·cm
FAQs

Preguntas frecuentes

Can you machine boron nitride to a custom size?

[TEST placeholder] Yes. Parts are machined to your drawing from standard blanks; one-off prototypes and production runs are both welcome [TBC].

What is the minimum order quantity?

[TEST placeholder] There is no minimum order value; one-off prototypes are welcome [confirm this applies to machined parts].

Contacte con nosotros

Machined boron nitride, prototype to production [TEST]

[TEST placeholder] Tell us about the part and an engineer will review manufacturability and quote. Drawings can follow by email. ISO 9001 certified, UK and France.

  • ISO 9001 certified
  • Stock held in Kidderminster (UK) and Île-de-France (France)
  • No minimum order value
Formulario de consulta

Díganos qué necesita

A member of the team will come back to you with a recommendation or a quote.

    I would like to receive marketing communications, technical insights and event invitations from Anderman & Company by email
    Para más información, consulte nuestra Política de privacidad.