Machined Boron Nitride Custom parts to your drawing [TEST]
[TEST placeholder, not for publication] We machine hexagonal boron nitride to your drawing, from one-off prototypes through to production quantities. Choose it when a part must survive thermal shock, resist molten metal and insulate at temperature, and still be machinable with standard tooling [TBC]. ISO 9001 certified, with engineering and stock in the UK and France.
Where machined boron nitride is used
Why choose machined boron nitride?
Standard tooling, no diamond grinding [TEST]
[TEST placeholder] Hexagonal boron nitride cuts with standard carbide tooling, so complex geometries that would need diamond grinding in alumina or zirconia can be turned, milled and drilled directly [TBC]. It resists rapid heating and cooling, is not wetted by most molten metals and glasses, and remains an electrical insulator at high temperature.
Where the part needs hardness or wear resistance instead, our machined ceramics service covers alumina, zirconia, silicon carbide and quartz to the same process.
Discuss your applicationWhat we can make, and what we cannot
[TEST placeholder] No invented tolerances: every figure TBC until confirmed with the machine shop.
図面から納品まで
-
1
Tell us about the part
Describe the application in the form, then send the drawing or sketch by email: PDF, DXF or STEP [accepted formats TBC].
-
2
We review and quote
An engineer checks manufacturability and quotes [turnaround TBC].
-
3
Approval
You approve the quote and any drawing amendments.
-
4
Manufacture and delivery
Indicative lead time TBC weeks from approval.
Boron Nitrideの材料データ
最高使用温度 2,100 °C 密度 確認中 曲げ強度 確認中 Show all 9 properties Hide full data sheet
| 特性 | 代表値 | 単位 | 試験規格 |
|---|---|---|---|
| 密度 | 確認中 | g/cm³ | ASTM C20 |
| 吸水率 | 確認中 | % | ASTM C373 |
| 硬度 | 確認中 | Mohs / Rockwell 45N | ASTM E18 |
| 曲げ強度 | 確認中 | MPa | ASTM F417 |
| 最高使用温度 | 2,100 材料ページの値 | °C | — |
| 熱伝導率(25 °C) | 確認中 | W/m·K | — |
| 熱膨張係数(20~1000 °C) | 確認中 | ×10⁻⁶/K | — |
| 絶縁耐力 | 確認中 | kV/mm | IEC 60672 |
| 体積抵抗率 | 確認中 | Ω·cm | JIS K6911 |
よくあるご質問
Can you machine boron nitride to a custom size?
[TEST placeholder] Yes. Parts are machined to your drawing from standard blanks; one-off prototypes and production runs are both welcome [TBC].
What is the minimum order quantity?
[TEST placeholder] There is no minimum order value; one-off prototypes are welcome [confirm this applies to machined parts].
該当するFAQはありません。別のキーワードをお試しいただくか、直接お問い合わせください。
その他のBoron Nitride製品
Machined boron nitride, prototype to production [TEST]
[TEST placeholder] Tell us about the part and an engineer will review manufacturability and quote. Drawings can follow by email. ISO 9001 certified, UK and France.
- ISO 9001 certified
- Stock held in Kidderminster (UK) and Île-de-France (France)
- No minimum order value
ご要望をお聞かせください
A member of the team will come back to you with a recommendation or a quote.