Boron Nitride · Machined Ceramics

Machined Boron Nitride Custom parts to your drawing [TEST]

[TEST placeholder, not for publication] We machine hexagonal boron nitride to your drawing, from one-off prototypes through to production quantities. Choose it when a part must survive thermal shock, resist molten metal and insulate at temperature, and still be machinable with standard tooling [TBC]. ISO 9001 certified, with engineering and stock in the UK and France.

Utilizações típicas

Where machined boron nitride is used

Why boron nitride

Why choose machined boron nitride?

MachinableThermal shockNon-wettingInsulating

Standard tooling, no diamond grinding [TEST]

[TEST placeholder] Hexagonal boron nitride cuts with standard carbide tooling, so complex geometries that would need diamond grinding in alumina or zirconia can be turned, milled and drilled directly [TBC]. It resists rapid heating and cooling, is not wetted by most molten metals and glasses, and remains an electrical insulator at high temperature.

Where the part needs hardness or wear resistance instead, our machined ceramics service covers alumina, zirconia, silicon carbide and quartz to the same process.

Discuss your application
Capacidade de maquinagem

What we can make, and what we cannot

Achievable tolerances
Linear ±TBC mm Bore ±TBC mm Flatness TBC
Blank sizes & forms
Rods to ØTBC mm Plates to TBC mm Bars, discs, billets
Boron nitride machining blanks →
Limits
Max part size TBC Min wall TBC mm Be honest about what cannot be done [writer]
Não sabe se é possível fabricar? Describe the part anyway and an engineer will tell you what is possible. Discuss your application

[TEST placeholder] No invented tolerances: every figure TBC until confirmed with the machine shop.

Como encomendar

Do desenho à peça entregue

  1. 1

    Tell us about the part

    Describe the application in the form, then send the drawing or sketch by email: PDF, DXF or STEP [accepted formats TBC].

  2. 2

    We review and quote

    An engineer checks manufacturability and quotes [turnaround TBC].

  3. 3

    Approval

    You approve the quote and any drawing amendments.

  4. 4

    Manufacture and delivery

    Indicative lead time TBC weeks from approval.

Propriedades técnicas

Dados do material: Boron Nitride

Temperatura máxima de serviço 2,100 °C Densidade A confirmar Resistência à flexão A confirmar Show all 9 properties Hide full data sheet
Boron Nitride: typical properties
Propriedade Valor típico Unidade Norma de ensaio
Densidade A confirmar g/cm³ ASTM C20
Absorção de água A confirmar % ASTM C373
Dureza A confirmar Mohs / Rockwell 45N ASTM E18
Resistência à flexão A confirmar MPa ASTM F417
Temperatura máxima de serviço 2,100 segundo a ficha do material °C —
Condutividade térmica a 25 °C A confirmar W/m·K —
Expansão térmica (20–1000 °C) A confirmar ×10⁻⁶/K —
Rigidez dielétrica A confirmar kV/mm IEC 60672
Resistividade volúmica A confirmar Ω·cm JIS K6911

Boron Nitride: typical properties

DensidadeA confirmar g/cm³
Absorção de águaA confirmar %
DurezaA confirmar Mohs / Rockwell 45N
Resistência à flexãoA confirmar MPa
Temperatura máxima de serviço2,100 segundo a ficha do material °C
Condutividade térmica a 25 °CA confirmar W/m·K
Expansão térmica (20–1000 °C)A confirmar ×10⁻⁶/K
Rigidez dielétricaA confirmar kV/mm
Resistividade volúmicaA confirmar Ω·cm
FAQs

Perguntas frequentes

Can you machine boron nitride to a custom size?

[TEST placeholder] Yes. Parts are machined to your drawing from standard blanks; one-off prototypes and production runs are both welcome [TBC].

What is the minimum order quantity?

[TEST placeholder] There is no minimum order value; one-off prototypes are welcome [confirm this applies to machined parts].

Contacte-nos

Machined boron nitride, prototype to production [TEST]

[TEST placeholder] Tell us about the part and an engineer will review manufacturability and quote. Drawings can follow by email. ISO 9001 certified, UK and France.

  • ISO 9001 certified
  • Stock held in Kidderminster (UK) and Île-de-France (France)
  • No minimum order value
Formulário de contacto

Diga-nos o que precisa

A member of the team will come back to you with a recommendation or a quote.

    I would like to receive marketing communications, technical insights and event invitations from Anderman & Company by email
    Para mais informações, consulte a nossa Política de Privacidade.