Alumina · Ceramic Tubes & Rods

Alumina Rods Solid ceramic rods for furnace and insulation work [TEST]

[TEST placeholder, not for publication] Dense aluminium-oxide rods in 95% to 99.7% purity grades for furnace supports, insulators and wear parts. Choose alumina when a rod must stay hard, electrically insulating and chemically inert to around 1750 °C [TBC]. Stocked in Kidderminster (UK) and Île-de-France (France), supplied under ISO 9001 with no minimum order value.

Typical uses

Where alumina rods are used

Why alumina

Why choose alumina rods?

Hard-wearingInsulatingChemically inertEconomical

The workhorse oxide ceramic [TEST]

[TEST placeholder] Alumina is hard, wear-resistant, electrically insulating and chemically inert, and stable to around 1750 °C [TBC]. In rod form that makes it the default choice for furnace supports, push rods and insulating spacers, at a lower cost than zirconia or silicon carbide.

Choose a higher purity grade where corrosion resistance or dielectric strength matters. The full ceramic tubes & rods range covers the other materials.

Discuss your application
Grades and purity

Which alumina grade do you need?

[TEST placeholder] Higher purity generally means better corrosion resistance and electrical performance, at higher cost. Confirm which grades are stocked as rods.

95% Al₂O₃ 95% alumina Lowest-cost dense grade. Good wear and general thermal performance [TBC].
Corrosion resistance Moderate Electrical performance Moderate Relative cost Lowest
Best for: General furnace supports and wear parts [TBC]
99% Al₂O₃ 99% alumina Higher corrosion resistance and electrical performance than 95% [TBC].
Corrosion resistance Good Electrical performance Good Relative cost Mid
Best for: Electrical insulation, laboratory furnace work [TBC]
99.7% Al₂O₃ 99.7% alumina Highest purity stocked. Best corrosion and electrical performance [TBC].
Corrosion resistance Good Electrical performance Good Relative cost Highest
Best for: Semiconductor, high-vacuum and analytical work [TBC]
Sizes and tolerances

Standard sizes, stock and made to order

From stockCut to lengthMade to order

Standard size ranges

Diameter 3 to 50 mm [TBC] Stock lengths TBC Machining tolerance ±0.1 mm [TBC]

[TEST placeholder] Standard diameters are held in stock and cut to length; larger diameters and ground finishes are made to order. Tolerances to be confirmed with the machine shop.

Discuss your application
Choosing between materials

Alumina vs Mullite vs Silicon Carbide

[TEST placeholder] Alumina is the default rod material; choose an alternative where thermal shock, transparency or thermal conductivity matters more than hardness and insulation.

3 materials compared Max temp · Thermal shock · Wear resistance · Chemical resistance · Electrical insulation · Choose this when… Show comparison Hide comparison
Material Max temp *°C Thermal shockWear resistanceChemical resistanceElectrical insulation Choose this when… View
Alumina 1,800°C PoorGoodGoodGood This page. Hardness, insulation and chemical inertness at the best price [TBC].
Mullite 3Al₂O₃·2SiO₂ 1,500°C GoodModerateGoodGood Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC].
Silicon Carbide SiC 1,600°C GoodGoodGoodPoor You need thermal conductivity and hot strength, and insulation is not required [TBC].

Alumina

Max temp *1,800°C
Thermal shockPoor
Wear resistanceGood
Chemical resistanceGood
Electrical insulationGood
Choose this when…This page. Hardness, insulation and chemical inertness at the best price [TBC].

Mullite

3Al₂O₃·2SiO₂
Max temp *1,500°C
Thermal shockGood
Wear resistanceModerate
Chemical resistanceGood
Electrical insulationGood
Choose this when…Thermal-shock resistance matters more than strength, e.g. fast-cycling furnaces [TBC].

Silicon Carbide

SiC
Max temp *1,600°C
Thermal shockGood
Wear resistanceGood
Chemical resistanceGood
Electrical insulationPoor
Choose this when…You need thermal conductivity and hot strength, and insulation is not required [TBC].
Technical properties

Alumina material data

Maximum service temperature 1,800 °C Density TBC Flexural strength TBC Show all 9 properties Hide full data sheet
Alumina: typical properties
Property Typical value Unit Test standard
Density TBC g/cm³ ASTM C20
Water absorption < 0.1 [TBC] % ASTM C373
Hardness TBC Mohs / Rockwell 45N ASTM E18
Flexural strength TBC MPa ASTM F417
Maximum service temperature 1,800 from hub °C —
Thermal conductivity @ 25 °C TBC W/m·K —
Thermal expansion (20–1000 °C) TBC ×10⁻⁶/K —
Dielectric strength TBC kV/mm IEC 60672
Volume resistivity TBC Ω·cm JIS K6911

Alumina: typical properties

DensityTBC g/cm³
Water absorption< 0.1 [TBC] %
HardnessTBC Mohs / Rockwell 45N
Flexural strengthTBC MPa
Maximum service temperature1,800 from hub °C
Thermal conductivity @ 25 °CTBC W/m·K
Thermal expansion (20–1000 °C)TBC ×10⁻⁶/K
Dielectric strengthTBC kV/mm
Volume resistivityTBC Ω·cm

[TEST placeholder] Typical values for dense alumina; grade-specific figures on request. No figure is published until it comes from supplier data.

FAQs

Frequent technical questions

What is the maximum temperature for alumina rods?

[TEST placeholder] Continuous use to around 1700 to 1750 °C with the right grade [TBC]. Above this, strength falls and creep accelerates.

Do you hold stock, and what is the lead time?

[TEST placeholder] Stock is held in Kidderminster (UK) and Île-de-France (France). Lead times for made-to-order sizes to be confirmed with sales [TBC].

Get in touch

Alumina rods from stock in the UK and France, no minimum order [TEST]

[TEST placeholder] Tell us what the rod has to do and we will recommend a grade and size, from stock or made to order. ISO 9001 certified supply from Kidderminster and Île-de-France.

  • ISO 9001 certified
  • Stock held in Kidderminster (UK) and Île-de-France (France)
  • No minimum order value
Enquiry form

Tell us what you need

A member of the team will come back to you with a recommendation or a quote.

    I would like to receive marketing communications, technical insights and event invitations from Anderman & Company by email
    For more details please see our Privacy Policy.